Peche a la mouche Deluxe Jazz Model 10 Amplifier

The "Deluxe" model is built of plain-flame maple or basswood (tulipwood), while the front is made of multi-layer wood. This is covered with precious wood, such as bird's-eye maple, plane tree or walnut.

Specifications:

• Power 12 watts RMS (approximately 25 watts)
• 10" Speaker made by "Weber speakers" with ALNICO magnets
• Two inputs high and low impedances (6.35 jacks)
• Power and tone adjustements
• Input and outupt (jacks 3.5/mono)
• Point to point wired
• Weight 7,2 kg for the"Deluxe" and 7,8 kg for the "Daphné"
• Dimensions : Heigh 38.5cm / Large 33cm / Depth 14cm
• Tubes: two EL84 / 12AX7 (ECC83)

The high and low inputs allow you to have variable sensitivity depending on the choice of microphone and of the "attack" on the instrument. The "high" level input will overdrive sooner depending on the pickup output level.

The "low" level input will withstand pickup with high level outputs and will allow strong playing on the instrument without overdriving. It is possible to use the two inputs at the same time if your instrument is equipped with two different microphones.

The tubes on our amps are chosen and tested for their musical qualities. A tube lasts about 5000 hours ! The three tubes used on our amps are available in many specialised shops. The build quality is excellent for certain makes, although certain others are best avoided. Please feel free to consult us for advice on this choice.

A speaker built according to our specifications, provided with an Al/Ni/CO magnet, ideal for a warm sound. Made In USA by Ted Weber !

The output transformer is wound in the way « old fashioned ». The transformers are made in USA.

A fuse protects the amplifier against overload and can be restarted without having to look for a spare fuse.

The « input/output » is like the Pick-up connexion to be found on the original Stimer amps (M6). It allows for playing over a play-back from an MP3 or a CD player. It is also possible to connect the amplifier to another amplifier or sound system with the « source » output.This « input/output » requires a 3.5mm mono jack. ATTENTION : You must never connect a « speaker » output from another amplifier to the « entree/sortie » mono jack.