DjangoBooks.com
Welcome to our Community!
Categories
- 18.1K All Categories
- 440 General
- 281 Welcome
- 11 Archtop Eddy's Corner
- 82 CD, DVD, and Concert Reviews
- 38 FAQ
- 9 Gypsy Jazz Italia
- 19 Photos
- 25 Gypsy Picking
- 4 Unaccompanied Django
- 4 Pearl Django Play-Along Vol.1
- 1 Gypsy Fire
- 25 Gypsy Rhythm
- 603 Gypsy Jazz University - Get Educated
- 117 Gypsy Jazz 101
- 190 Repertoire
- 143 History
- 96 Technique
- 40 Licks and Patterns
- Daniel Givone Manouche Guitare Method Users Group
- 17 Eddie Lang Club
- 1.1K Gypsy Jazz Gear
- 692 Guitars, Strings, Picks, Amps, Pickups and Other Accessories
- 344 Classifieds
- 39 Recording
- 39 Other Instruments
- 17 Violin
- 3 Mandolin
- 6 Accordion
- 3 Bass
- 10 Woodwinds
- 223 Gypsy Jazz Events
- 87 North America
- 87 Europe
- 49 International
In this Discussion
Who's Online 0
Today's Birthdays
Big Tone Pickup Installation
Travis Hill
New
Hi, just wondering if someone can point me in the direction of installing a big tone pickup on my gypsy guitar. I had a look on the forum but couldn't find a 'how to' guide. Some kind of step by step info would be really appreciated. I am curious to know exactly how tricky the installation is and if I can do it without taking it to a luthier.
Love the tone Mozes is getting here through what I assume is a big tone and a Roland AC amp. Usually big tones sound nasty but this is very nice.
Comments
It is a great sound but it could be any number of contact mics mounted inside and I suspect it is one of those, not the big tone.
I have a Manouche mic mounted inside. There's some discussion about it here
Great, thanks for that Buco, will check the thread out. Would love to have a sound like in this vid!
When you say 'installing' a big tone do you already have a bridge with a big tone installed or are you asking about installing a bigtone in to a bridge ?
I was just planning on buying a big tone from djangobooks, already assembled in bridge and ready for installation...
Hey Buco, is there a specific thread to read? the link just goes to the main forum page...
@Travis Hill I don't know of any guide for bigtone installs that's available but it generally is something any experienced tech could easily do. All that is required is that you drill a hole in the top for the wire and then install an endpin jack. The rest is just small adjustments to the bridge height to get your action set where you want it.
Of course you’ll have to make sure that the bottom curve ( radius ) of the bridge ( bigtone ) will match the "bombe" of your guitar top.
To do so you will have to stick some emery paper where the bridge is going to sit between the moustaches.
And then, rock the bridge back and forth on the emery paper until both surfaces makes a perfect match.
Always a good idea to start with a bridge (bigtone) that’s is taller than what you actually need....
And then you file the notches for the strings spacing. Don’t go too deep with these notches !!!
Voila.
Don't know how I managed that, yes this thread is what I meant to post a link to
Thanks for the feedback guys, appreciate all the info, Merry xmas!