DjangoBooks.com

*SOLD* Old Antoine DiMauro for sale

2

Comments

  • rudolfochristrudolfochrist Worms, GermanyNew Dupont MD-100
    Posts: 144

    I had the same problem. Newer versions of the bulletin board software that Djangobooks uses, seem to not support whitespace (other special characters as well) in usernames. So, whenever you see a space in a username and would like to see the user profile then replace the space with a '+' sign.

    Profile link: https://www.djangobooks.com/forum/profile/Andrew+Ulle

    Or you can ask @MichaelHorowitz to remove all spaces and special characters in your username.

    BucoDoubleWhiskyBillDaCostaWilliamsMichaelHorowitz
  • AndrewUlleAndrewUlle Cleveland, OH✭✭✭ Cigano GJ-15
    Posts: 542

    Sorry, I’ve been traveling so I hadn’t checked back here. I don’t seem to get the email notifications I used to get if someone commented. In any case, the DiMauro is sold! Thanks!

    Bucobillyshakes
  • billyshakesbillyshakes NoVA✭✭✭ Park Avance - Dupont Nomade - Dupont DM-50E
    Posts: 1,419

    Hope the new owner will be able to spring for a new neck if that is what is required. Congrats on selling it and hope it found a great new home.

    AndrewUlle
  • AndrewUlleAndrewUlle Cleveland, OH✭✭✭ Cigano GJ-15
    Posts: 542

    Thanks, @rudolfochrist , I have put in a request to change my user name. The DiMauro is on its way to Paul up in Portland, ME. I hope he can salvage the neck & fingerboard, it's a great feel for rhythm playing.

    Bucorudolfochristbillyshakes
  • paulmcevoy75paulmcevoy75 Portland, MaineNew
    Posts: 198

    Hello all

    I thought you might want to check out the repair I did on the neck. Since it had been repaired a few times I wanted to do my best to make this the last one. I drew up a plug in my design program and used my CNC to make both the plug and a routing jig to route the plug. I made a tapered plug to minimize the amount of end grain to end grain contact. I was lucky that there was no truss rod because I could sink the plug pretty deep into the neck. Then I did a similar thing on the side with two tapered wedges.

    It seems to be pretty darn solid. Not invisible but I don't think that would have been possible. The guitar sounds great and I'm thankful to Andrew for selling it to me.

    There's an album of pictures here:

    https://photos.app.goo.gl/pB5xqMD7mNMwUHJA9

    flacoBucoWillieAndrewUlleBillDaCostaWilliamswimJangle_Jamierudolfochristdb5billyshakes
  • flacoflaco Shelley Park #151, AJL Quiet and Portable
    Posts: 123

    That's an amazing job in a short amount of time!

    AndrewUlle
  • Posts: 5,032

    Hey thanks for letting us know. You're very creative thinker.

    AndrewUlle
    Every note wants to go somewhere-Kurt Rosenwinkel
  • WillieWillie HamburgNew
    Posts: 867

    50% stolen ideas -> 50 % creative thinker (which is quite a lot).

    BucoDoubleWhisky
  • AndrewUlleAndrewUlle Cleveland, OH✭✭✭ Cigano GJ-15
    Posts: 542

    I'm glad you were able to do the repair while preserving the entire headstock. A more traditional repair may have entailed replacing the headstock (or neck!), or inserting a significantly large piece of new wood joining the neck and existing headstock. Kudos on a nice fix - I'm jealous, I loved that guitar, but it's good that someone with more skills than I will be playing it.

    Jangle_Jamie
Sign In or Register to comment.
Home  |  Forum  |  Blog  |  Contact  |  206-528-9873
The Premier Gypsy Jazz Marketplace
DjangoBooks.com
USD CAD GBP EUR AUD
USD CAD GBP EUR AUD
Banner Adverts
Sell Your Guitar
© 2024 DjangoBooks.com, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.006172 Seconds Memory Usage: 1.007729 Megabytes
Kryptronic