DjangoBooks.com

Galli V027 S & S Low E doesn't go all the way in the tailpiece?

HI all,

I searched but didn't find anything on this exactly. I feel like a dork asking, but I don't recall this from before, many years back.

I installed a set of V027's and am immediately gonzo for them. However, the Low E ball end won't insert fully through the tailpiece hole. I almost exclusively always used loop ends, but do recall a set or two of ball ends, and don't remember this.

I don't imagine that's right? Is the ball supposed to go all the way up against the post, or will time work it in?

Thanks much.

-Paul

pas encore, j'erre toujours.
«13

Comments

  • vanmalmsteenvanmalmsteen Diamond Springs ,CANew Latch Drom F, Eastman DM2v, Altamira m30d , Altimira Mod M
    Posts: 337

    Had exact problem with the gallis myself the other day! Lucky I found a loop end in my bag. I thought the problem was with the hole in the post not being big enough but now I know that the problem is with the strings themselves? Apparently?

    Passacaglia
  • PassacagliaPassacaglia Madison, WI✭✭✭✭
    Posts: 1,471

    Ha! Timing. The holes are small, and I can't see any way for that low E to go in. I can't imagine it's a problem with the string, and thought it would be weird if the Altamira holes are somehow non-standard small. So, I'm stumped. Thank god I'm playing alone, because if I showed up at a jam, I imagine I'd truly look like a noob. Playing like one is enough, thanks.?

    -Paul

    pas encore, j'erre toujours.
  • vanmalmsteenvanmalmsteen Diamond Springs ,CANew Latch Drom F, Eastman DM2v, Altamira m30d , Altimira Mod M
    edited May 2020 Posts: 337

    Oh wait, mine is an Altamira as well...hmmm

    perhaps someone else will chime in

    Passacaglia
  • NewcastleBudNewcastleBud Erstwhile✭✭✭✭
    Posts: 124

    If the string itself can pass through the post, but it jams up at the red yarn (or whatever it is), you should be able to force it through with no major repercussions.

    Just my dos centavos.

    PassacagliaBuco
    I think, therefore I am......I think.
  • vanmalmsteenvanmalmsteen Diamond Springs ,CANew Latch Drom F, Eastman DM2v, Altamira m30d , Altimira Mod M
    edited May 2020 Posts: 337

    In my experience, the low E would not fit, the A string did fit but stopped at the yarn, and you’re right a good hard pull brought it all the way through.

    Passacaglia
  • NewcastleBudNewcastleBud Erstwhile✭✭✭✭
    Posts: 124

    Yup,

    I've used V027's for quite some time, and once in a great while, you get that exuberantly wound E or A string.

    Passacaglia
    I think, therefore I am......I think.
  • PassacagliaPassacaglia Madison, WI✭✭✭✭
    Posts: 1,471

    Thanks guys. I guess that lone low E is just going to have to look like a stray, then. Just didn't know if somehow that weakened the string. The A actually flew home on tuning it a few times.

    Have to say....MAN do I love the sound with these strings.

    mac63000vanmalmsteenBuco
    -Paul

    pas encore, j'erre toujours.
  • Posts: 4,963

    A few times I even had to file down the end of the winding after removing the silk wrapping, think it was with LaBella which has beefier low E. Strings are fun to experiment with.

    Passacaglia
    Every note wants to go somewhere-Kurt Rosenwinkel
  • PassacagliaPassacaglia Madison, WI✭✭✭✭
    Posts: 1,471

    It's not for the PITA that makes me want loops. Really. It's only the cool look. Really.

    -Paul

    pas encore, j'erre toujours.
  • BonesBones Moderator
    Posts: 3,323

    Can you pop the little metal cylindrical piece out of the end of the string and just use it like a loop end???

Sign In or Register to comment.
Home  |  Forum  |  Blog  |  Contact  |  206-528-9873
The Premier Gypsy Jazz Marketplace
DjangoBooks.com
USD CAD GBP EUR AUD
USD CAD GBP EUR AUD
Banner Adverts
Sell Your Guitar
© 2024 DjangoBooks.com, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.00634 Seconds Memory Usage: 1.007805 Megabytes
Kryptronic